Uniz SLASH 2, Руководство пользователя

Страница: 82 / 88

76
F HELP AND SUPPORT
15. Automatic pumping failed.
The peristaltic pump nut
fell off Install the nut according to the guidance
The peristaltic pump tube
fell off or blocked Install or replace the tube according to the
guidance
The buckle of the
peristaltic pump fell off
Install the tube according to the guidance
16. Abnormal display appear on
the front light of the printer There is poor contact in
the circuit board cable or
program error Reinsert the cable and restart
17. Touch problems occur with the
front light of the printer The circuit board has
broken Replace with a new circuit board according to
the guidance
18. Abnormal sound may be heard
from the rear cooling fan The fan cable has stuck or
the bolt is over tightened Remove the rear fan filter cover and check if
there is any cable interference; adjust the
tightness of the bolt accordingly
19. The printer cannot be
restarted with a blinking red light
button 1.Loose SD card
installation
1.Re-insert the SD card
2.Replace the circuit board