Uniz SLASH 2, Руководство пользователя

Страница: 46 / 88

40
D UNIZ SOFTWARE
Fill Resin
Click ‘Fill’ to start pumping resin from the bottle into the tank. Click again to stop.
Redraw Resin
Click ‘Redraw’ to start redrawing resin from the tank back into the bottle. Click again to stop.
Full Screen Clean
Click ‘Clean’ to expose the entire screen in order to fully cure and clean the resin at the bottom of
the tank. Debris from previous jobs may damage the LCD screen in the next job. The Clean
function will form an entire resin film entrapping the debris from previous jobs. Once the resin film
is removed, the Resin Tank is clean and ready for the next print job.
Tips
: It is recommended to check the bottom of Resin Tank before every print job. When there is
debris either floating in the resin or sticking to the bottom of vat, it may damage the LCD.
NOTE: DO NOT remove the Resin Tank during cleaning exposure. After exposure, however,
you may lift the Resin Tank to remove the cured resin film.
Show Logo
Show Logo is used to verify if the LCD screen is functional. Before using this function, please
remove the Build Platform and Resin Tank, and then click ‘Show Logo’ Button to show the UNIZ
logo on the LCD screen to test communication and LCD screen.