Uniz SLASH 2, Руководство пользователя

Страница: 68 / 88

62
E MAINTENANCE
After the z-axis recalibration is performed, the factory set fine-tuning value A
0
will be forced to
reset. At this time, the standard height test piece needs to be printed again to calculate the value
A. The z-axis height compensation operation before the next printing can ensure the accurate
printing height.
RESIN LEVEL CONTROL SYSTEM
The Resin Level Control System is designed to maintain a constant level of resin in the Resin Tank
during a print job. This is essential for printing large objects when regular refilling is mandatory. It
can also pump resin back into the Resin Bottle for resin replacement and storage purposes. The
system consists of three components: Resin Level Sensor, Peristaltic Pump with Pump Tube, and
Bottle Holder plus Resin Bottle.
TANK RESIN LEVEL SENSOR
This is the sensor in the Resin Tank that controls resin level during a print job.
1. Detach the level sensor.