Uniz SLASH 2, Руководство пользователя

Страница: 53 / 88

47
D UNIZ SOFTWARE
Note
: Timer resetting is imperative step in accessories replacing, otherwise running time will
getting inaccuracy.
Start Job:
Click ‘Start’ Button , the system will send the current slice data to printer and start
printing.
(1). Send Data to Printer : Click ‘Start’ Button to send current slices to the selected
printer.
(2). Complete File Transfer : Once you click Start, UNIZ Desktop’s progress bar and the
printer’s front LED button will indicate the file transfer progress by lighting in blue.
(3). Confirm Print Job : Make sure that your printer is ready to print and then touch the
printer’s front button to confirm print job.
Warning
:
Before final confirmation, please make sure the Build Platform, Resin Tank are
installed. Make sure the Build Platform and Resin Tank are clear of debris.
After confirmation, you may disconnect your computer from the printer.
Pause Job:
Click ‘Pause’ to suspend a printing job.
Resume Job:
Click ‘Resume’ to resume a paused printing job.
Cancel Job:
Click ‘Cancel Job’ to cancel the current printing job.
Renaming Printer:
Double click the printer name or s/n to input a new alias and press enter to
finish renaming.
Upgrade firmware:
An icon ‘ ’ will appear next to the firmware version when there is new
version firmware available. Double click the icon to start upgrading. Restart the printer when the
upgrade is finished.
Note
: DO NOT disconnect the printer and the software or turn off the UNIZ software during the
data transmission.
ADDITIONAL TOOLS
New Project:
The current project will be discarded, and a new project will be created.
Save Project:
The software save everything you made to project file that contains model data,
support structures and transformation data (translation, orientation, scaling) and you will be able
to load your model including all modification later.
Save Project as:
The software save current project to another project file.
Undo Operation:
Repeal one previous operation.