Uniz SLASH 2, Руководство пользователя

Страница: 26 / 88

20
D UNIZ SOFTWARE
Convert SLC to Slice
Users can convert SLC (stereo lithography contour) file to Uniz print file.
Layer Thickness Requirements
Most resins have a variety of layer thickness as follows:
Resin Type Layer Thickness
（
mm
）
zABS AMBER 0.010/0.025/0.050/0.075/0.100/0.150/0.200/0.300
zABS GRAY 0.010/0.025/0.050/0.075/0.100/0.150/0.200/0.300
zABS GREEN 0.010/0.025/0.050/0.075/0.100/0.150/0.200/0.300
zABS IVORY 0.010/0.025/0.050/0.075/0.100/0.150/0.200/0.300
zABS WHITE 0.010/0.025/0.050/0.075/0.100/0.150/0.200/0.300
zDENTAL MODEL SAND 0.025/0.050/0.100
zENG AMBER 0.025/0.050/0.075/0.100/0.150/0.200/0.300
zFPU INTRINSIC 0.025/0.050/0.075/0.100/0.150/0.200
zHIPS YELLOW 0.025/0.050/0.100
zOrtho GRAY 0.010/0.025/0.050/0.075/0.100/0.150/0.200/0.300
zPMMA CLEAR 0.025/0.050/0.075/0.100
zSG AMBER 0.025/0.050/0.100
zUDP GRAY 0.010/0.025/0.050/0.075/0.100/0.150/0.200/0.300
zUDP ORANGE 0.010/0.025/0.050/0.075/0.100/0.150/0.200/0.300
zWAX AMBER 0.025/0.050/0.075/0.100/0.150
zWAX PURPEL 0.025/0.050/0.100
Layer thickness should meet the above requirements, otherwise the height of the printed model
will be inconsistent with the actual.
Select SLC save path
Right-click ‘SLC Conversion Slice’. Click ‘Select Folder’ in the pop-up menu. Select the path of SLC in
the pop-up dialog box to save the file.
Click ‘SLC conversion slice’. The list on the right shows all SLC files under the current storage path.