Uniz SLASH 2, Руководство пользователя

Страница: 80 / 88

74
F HELP AND SUPPORT
6. Edge warp defects on the
printed model Problems with supports
structures Follow the guidance to manually add the
supports
The model bottom is not
pressed to the XY plane
tightly Check the first layer slice for any error
7. There are wavy lines on the XY
plane Wrinkles on the Resin
Tank film Replace with a new Resin Tank and increase the
cooling time properly for the next print
8. Liquid or solid resin residue
appear on the screen surface Solid resin residue on the
bottom of the Build
Platform causes damage
to the Resin Tank film Replace with a new Resin Tank and clean the
residual resin on the screen
9. The resin leaks from the right
bottom of the printer Resin Bottle not inserted
into the right place Clean up the residual resin according to the
guidance and replace with a new Resin Bottle,
make sure the bottle is inserted all the way in
The top vent hole of the
Resin Bottle has not been
pierced Pierce either top hole of the Resin Bottle with
the provided awl