Uniz SLASH 2, Руководство пользователя

Страница: 34 / 88

28
D UNIZ SOFTWARE
Support Parameters
Spacing
Spacing sets the horizontal distance between supports automatically to control the support s
density.
Diameter
Diameter setting controls the thickness of support.
Head Type
The shape of the contact position between the support head and the model is a ball. The thickness
of the connection between the support head and the ball differs with the setting of Head Type.
Head Length
The model size, the hollow part volume and the support thickness determine that head length
should be set differently to avoid the support and model sticking.
Touch point Size
The touch point size between the support and the model needs to be weighed when setting up.
 Small touch points are easier to remove, but printing may fail due to the overweight of the
model.
 Big touch points increase the reliability of the supports but may overlap the details of the
model surface and cause problems with removal, or may result in the loss of the model
surface quality.
Base Type
The software offers four base types: Point, Line, Triangulation and Plane.