Uniz SLASH 2, Руководство пользователя

Страница: 41 / 88

35
D UNIZ SOFTWARE

Cool Down Time is the time to cool down the exposed layer to protect the polymer film from
overheating. For sustained low peel force and prolonged film life, it is recommended to keep
the film temperature below 50
℃
. Overheating will cause the film to warp, delaminate, or
even break.
Tips
: Avoid exposing the same spot or area over and over; try to orient the model’s walls or
pillars in oblique angle so the exposure area changes every next layer.
Pressing the ‘ Advanced ’ Button will open following sub menu.

Shrink : Due to light scattering and light refraction effect, profile of printed model may give
rise to deviation more or less. To calibrate via ‘Shrink’ option on Slice Parameters Interface.
(1) The gray area in demo graph at below is the slicing at certain height.
(2) Slicing of solid model with external profile, internal profile does not exist. Here, we assume
a hollow-structure model.
(3) The dash line in right graph is the profile of slicing before shrink.
(4) Slicing will be displayed on LCD panel and printed. The validation of shrink setting relies on
actual position of model and resolution of LCD panel.
•
In case of 0mm, maintain original slicing, no extra handling.
•
For positive value, e.g. 0.1mm, slicing internal profile inward deviate 0.1mm, internal profile
outward deviate 0.1mm.