Uniz SLASH 2, Руководство пользователя

Страница: 47 / 88

41
D UNIZ SOFTWARE
Reset Z-Axis Zero Position
Reset Z-axis Zero Position is used to reset the zero of Z axis. Please remove the Resin Tank and
wipe clean the Build Platform before using this function. On the popup box, click ‘Yes’ Button,
then push the Build Platform down manually to touch the LCD screen, then click ‘Yes’ Button
again, the platform will rise back to the upper position and finishes the process.
This function is used only when the model could not stick onto the platform because the Z axis
does not cling to the LCD screen during the printing of the first layer.
Z-axis Compensation
Click ‘Z-axis Compensation’ button, open dialog, input a value and submits to finish the
compensation function. ‘Z-axis Compensation’ may only subtract (shorten) Z-axis height from the
mechanical calibrated value.
This function is used only when the printed model is smaller than the theoretical value on the Z
axis direction. The adjustment value is equal to the theoretical value minus the actual value.
Calibration of Resin Level Sensor
Click ‘Calibration of Resin Level Sensor’ button, open Calibration dialog.