APPENDIX B
-
SP2100 2D Imager Setup Barccodes, con’t
BarcodeGuy.com® - UnionNet SP2100 User’s Guide
2D
Im
ag
er
O
nly
Programming “ON”
Programming “OFF”
Figure B.0
Instructions:
To change the option, first scan the
Programming “ON”
barcode.
Then scan the Option Code. Finally scan the
Programming “OFF”
barcode.
43
B.26 - Data Matrix
Set Data Matrix
Factory Defaults
Enable
Data Matrix
Disable
Data Matrix
4.
Scan the
Set Max Length
barcode, then scan the digit code(s) from
Section B.29
of this Appendix (B) for the number
representing the minimum length.
5.
Scan the
Save Programming
barcode, then scan the
Programming “OFF”
barcode.
You can read multiple barcodes within the imager’s field of view. There are three modes:
●
Mode 1
Read one barcode only.
●
Mode 2
Read fixed number of barcodes only.
●
Mode 3
Composite Reading. Try to decode the fixed number of barcodes. If failure then read one barcode only.
Set Data Matrix
Max Code Length
(Default = 3116)
Set Data Matrix
Min Code Length
(Default = 1)
NOTES:
* String length must be less than 65535 bytes.
* MAX LENGTH must be less than or equal to MIN LENGTH.
* If MIN LENGTH = MAXLENGTH, only that single length barcode
string will be allowed.
Data Matrix
Single Code
Data Matrix
Twin Code
Data Matrix
Single & Twin Code
Programming Method
: Scan the
Programming “ON”
barcode, then the
Mode Barcode
. If you scan Mode 2 or Mode 3, then
scan the appropriate
“Number of Barcodes”
numeric code below. Then scan the
Programming “OFF”
barcode.
Min and Max String Lengths
- To limit the length of the barcode string as a form of validation, you can set a minimum and
maximum string length. These lengths include check and stop/start digits if applicabl to the symbology. To set the string length:
1.
Scan the
Programming “ON”
barcode.
2.
Scan the
Set Min Length
barcode, then scan the digit code(s) from
Section B.29
of this Appendix (B) for the number
representing the minimum length.
3.
Scan the
Save Programming
barcode.
4.
Scan the
Set Max Length
barcode, then scan the digit code(s) from
Section B.29
of this Appendix (B) for the number
representing the minimum length.
Data Matrix
Square Only
Data Matrix
Square & Rectangular
Содержание SP2100
Страница 64: ...64 BarcodeGuy com UnionNet SP2100 User s Guide APPENDIX E Android UniLinker and SP2100 in SPP Mode ...
Страница 69: ...69 BarcodeGuy com UnionNet SP2100 User s Guide APPENDIX G SP21001D Scan Engine Symbology Default ...
Страница 71: ...71 BarcodeGuy com UnionNet SP2100 User s Guide APPENDIX I SP21001D Scan Distance Chart ...
