APPENDIX B
-
SP2100 2D Imager Setup Barccodes, con’t
BarcodeGuy.com® - UnionNet SP2100 User’s Guide
2D
Im
ag
er
O
nly
Programming “ON”
Programming “OFF”
Figure B.0
Instructions:
To change the option, first scan the
Programming “ON”
barcode.
Then scan the Option Code. Finally scan the
Programming “OFF”
barcode.
35
B.16 - EAN/UCC Composite, con’t
Enable
UPC/EAN Composite
Disable
UPC/EAN Composite
B.17 - Code 11
Set Code 11
Factory Defaults
Enable
Code 11
Disable
Code 11
●
Check Digit Don’t Transmits
-
The last digits are check digits. Perform the mathematical check using the last digits as validation,
but don't transmit the check digits to the host.
Min and Max String Lengths
- To limit the length of the barcode string as a form of validation, you can set a minimum and
maximum string length. These lengths include check and stop/start digits if applicabl to the symbology. To set the string length:
1.
Scan the
Programming “ON”
barcode.
2.
Scan the
Set Min Length
barcode, then scan the digit code(s) from
Section B.29
of this Appendix (B) for the number representing
the minimum length.
3.
Scan the
Save Programming
barcode.
Set Code 11
Min Code Length
(Default = 4)
Set Code 11
Max Code Length
(Default = 48)
NOTES:
* String length must be less than 127 bytes.
* MAX LENGTH must be less than or equal to MIN LENGTH.
* If MIN LENGTH = MAXLENGTH, only that single length barcode
string will be allowed.
Code 11 - Check Digit(s)
Don’t Transmit
Code 11 - Transmit
Check Digit (s)
Code 11
No Check Digit
4.
Scan the
Set Max Length
barcode, then scan the digit code(s) from
Section B.29
of this Appendix (B) for the number representing
the minimum length.
5.
Scan the
Save Programming
barcode, then scan the
Programming “OFF”
barcode.
Code 11 may include a single or double Check Digit (not compulsory) as the last digit(s) of the encoded string. When used, the check
digit is the result of the symbology's mathematical check of the preceding digits - either a MOD 11 or MOD 9 result.
●
No Check Digit
-
Read without performing the check using the last digit and transmit all digits. In effect, there is no check digit
present.
Содержание SP2100
Страница 64: ...64 BarcodeGuy com UnionNet SP2100 User s Guide APPENDIX E Android UniLinker and SP2100 in SPP Mode ...
Страница 69: ...69 BarcodeGuy com UnionNet SP2100 User s Guide APPENDIX G SP21001D Scan Engine Symbology Default ...
Страница 71: ...71 BarcodeGuy com UnionNet SP2100 User s Guide APPENDIX I SP21001D Scan Distance Chart ...
