UnionNet SP2100, Руководство пользователя

Страница: 14 / 80

14
BarcodeGuy.com® - UnionNet SP2100 User’s Guide
Figure 3.4
2
3
4
5
6
7
Note no SP2100!
8
Figure 3.5
9
10
Figure 3.6
11
Figure 3.7
11
entry at the top with the caption “Connected to hid” underneath. There will be a keyboard icon to the right of
the SP2100 listing.
7. The SP2100 will beep and display
HID
in the Status Bar - see
figure 3.8
.
Your SP2100 is now connected to your Android device! Test it out by pressing the “Home” button on the bottom center
of the Android phone or tablet! To try it out, launch Gmail and compose a new message. Make sure the cursor is flashing
in the body of the email, then scan a barcode! The text shows up where the cursor was, just like you used the soft keypad
to type it in!
On Windows PC or Laptop
- Make sure your bluetooth card or dongle on the PC is active.
You should see the bluetooth icon in the Systems Tray (aka Notification Area) on the bottom right
of the Windows screen by the clock (
figure 3.9)
. Consult the appropriate guide to turn the host
bluetooth radio on and have it in “Discovery” mode.
IMPORTANT!
These instructions apply to using the SP2100 with a wireless
Bluetooth
connection to a Windows PC or laptop. USB
Connections are used only to change the UnionNet SP2100’s firmware programming.
3.3 - Windows HID Connection Instructions
When you’ve confirmed that bluetooth is active on the PC, refer to
figure 3.10
and
figure 3.11
for
Steps 1-4
below:
Figure 3.9
Figure 3.8
5. The Android device and the SP2100 will find each other. The SP2100 will show up at the bottom of the
“Bluetooth devices” list . Press on the SP2100-XXXXXX entry and “Pairing…” will appear underneath the
SP2100’s title.
6. When the SP2100 and your Android device pair, the “Bluetooth devices” list will have the “SP2100-xxxxxxx”
3.2 - Android HID Connection Instructions, con’t
1. Press “Start” , “Devices & Printers” , “Add a Device” (
figure 3.10)
2. The “New Device Wizard” will open. Windows will search for active
bluetooth devices in range (
figure 3.11’s window)
.
3. The SP2100 and the PC will find each other. The SP2100 will be displayed
with a keyboard icon identified as “SP2100-XXXXXXX” . Note that the
Figure 3.10
2
1
3
last 5 digits are the SP2100’s serial number. Highlight the SP2100 and press
the “Next” button. Windows will search for and automatically install
the appropriate drivers for the SP2100 to be used as a HID & serial device
through the USB cable. You’ll see balloon in the bottom right corner by the
clock indicating driver installation , then one that says that the drivers are
installed and the SP2100 is ready to use.
4
5
6
1 2 3
9 10