Friday, November 07, 2008
91
Set CC Override
This mode determines how the scanner will behave when a Close Call signal is detected.
On
The scanner alerts (depending on the CC Alert setting) and displays
Η &ŽƵŶĚ͊͟
then immediately
jumps to the Close Call frequency.
Off
The scanner alerts (depending on the CC Alert setting) and displays "CC Found!" and "Press FUNC
Key" for the time set at
Set CC Pause
. If you press [FUNC] or [E / yes / gps] during this time, the
scanner jumps to the Close Call frequency.
Detail of this setting :
Close Call Search
.
Press [E / yes / gps] to accept the entry and return to the previous menu.
Set CC Alert
You can edit these settings.
Set Alert Tone
Set Alert Light
Set CC Pause
Press [E / yes / gps] to enter each item.
Set Alert Tone
This item can select the type and the level alert.
Off
Beep doesn
͛
t sound.
Alert1-9
The scanner sounds Alert1-9 with CC found.
If you select Off, the scanner returns to the previous menu.
If you select Alert1-9, the scanner goes to Alert Level selection.
Auto
The alert is set to the same volume as normal audio.
Level1-15
The alert is fixed to the selected audio level.
Press [E / yes / gps] to accept the entry and return to the previous menu.
