Friday, November 07, 2008
100
Set Delay Time
This setting controls how long the scanner stays on Mute Off state after a transmission ends.
Turn [Scroll Control] to select setting value from:
0 sec
1 sec
2 sec
5 sec
10 sec
30 sec
Infinite
Then press [E / yes / gps] to accept and return to the previous menu.
Set Alert
You can set these options in this menu.
Set Alert Tone
Set Alert Light
Press [E / yes / gps] to enter the setting.
Set Alert Tone
You can set whether the scanner should sound an Alert Tone when a tone-out channel becomes active*.
Off
No alert sounds.
Alert 1-9 The scanner sounds Alert1-9 with the Channel becomes active.
If you select
͞
Off
͟
, the scanner returns to the previous menu.
If you select
͞
Alert1-9
͟
, the scanner goes to Alert Level selection.
Auto
The alert is set to the same volume as normal audio.
Level1-15
The alert is fixed to the selected audio level.
Press [E / yes / gps] to accept the entry and return to the previous menu.
