Friday, November 07, 2008
137
Store TGID
To quickly store a TGID into a channel, enter the TGID using the number and decimal keys. Press the
decimal key twice to enter a hyphen. If you press the decimal key first or at the left end, it will be entered
as "i" for I-Call ID. Then press [E / yes / gps] and the scanner prompts "Quick TGID Save?".
Qui ck TGI D Save?
4128
If you press [Hold /
] without pressing [E / yes / gps], the scanner goes directly to the ID Search Hold
Mode and the TGID is not stored. When you enter an illegal ID, the scanner displays
͞
Bad TGID Press Any
Key
͟
and sounds an error tone.
If you press [E / yes / gps], the scanner creates "Qck Save Grp" in the current system and stores this TGID
there.
If you press [. / no / pri], the scanner prompts you to select a system to store this TGID.
Select the system* and the channel group, then the TGID is stored.
*In system selection, the scanner displays only the systems whose TGID format matches the TGID you
entered. The ID format and system type relation are the following.
Input TGID (n: number)
System Type
nnn-nn
nnnn-n
n-
nnn-
nnnn-
nnn-n
nnnnn
innnnn
Motorola Systems
(Type I, Type II)
nnnnn
innnnnnnn
P25 Systems
nn-nnn
nn-
nn-nn-
innnnn
EDACS Systems
*Only AFS Format is allowed for
Direct Entry except for I-Call ID.
n-nn-nnn
n-nn-
LTR Systems
*For details of TGIDs, please see:
TGID FORMAT FOR TRUNKED SYSTEM
.
Once saved, the scanner allows you to change the Channel settings at menu location
Channel Settings
.
Press [HOLD /
] to go to ID Scan Hold and the scanner tries to acquire the Control Channel for the
current site or the first site of the System. If successful, it then holds on the stored Channel. Otherwise, it
displays "Finding CtrlChan" (and Channel Name).
