Friday, November 07, 2008
120
Location Based Scanning
This operation controls the lockout state for each group or site when the scanner is connected to a GPS
unit.
This works automatically based on the location data from GPS when the feature is set to
͞
On
͟
in
Set GPS
Enable
.
If the scanner goes within the l
ŽĐĂƚŝŽŶ͛Ɛ ƌĂŶŐĞĨŽƌ Ă
group or site, the scanner displays "Location Unlock"
on the first line and the group name or the site name on second line.
GPS
Locati on Unlock
Si te 1- 1
MOT
S0: - - - - - - - - - -
GRP - - - - - - - - - -
When the scanner goes outside the set range, the group or site is automatically temporarily locked out.
The scanner displays
͞
Location L/O
͟
on first line and the group name or the site name on second line.
GPS
Locati on L/O
Si te 1- 1
MOT
S0: - - - - - - - - - -
GRP - - - - - - - - - -
This operation does not affect systems/sites whose SQK is disabled.
If a GPS is detected as soon as the scanner is turned on, the scanner displays "GPS CONNECTED" instead of
displaying individual lock/unlock messages for groups and sites. It applies the location-based rules to all
systems at one time.
GPS
GPS CONNECTED
S0: - - - - - - - - - -
GRP - - - - - - - - - -
