Friday, November 07, 2008
45
Program Site
You can select an existing Site for editing or create a new Site. Site Names that already have been created
are displayed as Menu Items.
Sites are sorted in the order of the Site Quick Key (See:
Set Quick Key
) as 1, 2,
͙
,0,11,
͙
99, 90 and not
assigned. The order of Sites belonging to the same Quick Key is determined by the order in which they
were created. "New Site" is displayed as the last menu item.
Select
͞
New Site
͟
and press [E / yes / gps] to create a new site.
Note: At first, only "New Site" is displayed.
The limit of Sites in a system is 256. So, if you try to select "New Site" when there are already 256 Sites, the
scanner displays "Over Limit" and sounds an Error Tone.
Creating a New Site
Press [E / yes / gps] to create a new site. After a new site is created, the scanner assigns a default site
name of "Site xxx-yyy TTT".
xxx:
System index number,
yyy:
1-3 digit sequential site index number,
TTT:
abbreviation for the site type, as follows.
MOT Type = "MOT"
EDACS WIDE/NARROW=
͞
EDC
͟
LTR Type =
͞
LTR
͟
P25 Standard Type =
͞
P25
͟
P25 One-Freq Type =
͞
1FQ
͟
Site Settings
The following site settings are possible:
Edit Name
Set Quick Key
Set Startup Key
Edit Band Plan (P25)
Edit Band Plan (Mot)
Set Site Type
Set Frequencies
Set Modulation
Set Attenuator
Set Lockout
Set Hold Time
Set C-Ch Only
Set LocationInfo
P25 Waiting Time
Delete Site
New Site
The items available are different for each Site Type. See
Site Settings
for details of the difference.
Turn [Scroll Control] knob and press [E / yes / gps] key to go to each setting.
