Friday, November 07, 2008
39
Set End Code
This setting determines how the scanner treats the transmission end code.
Analog
The scanner pays attention to the analog transmission end code.
Digital The scanner pays attention to both analog and digital transmission end code
Ignore
The scanner ignores the transmission end code and waits for carrier drop.
Press [E / yes / gps] to accept the selection and return to the previous menu.
Emergency Alert
The following options can be set in this menu.
Set Alert Tone
Set Alert Light
Press [E / yes / gps] to enter the setting.
Set Alert Tone
If
͞
Set Alert Tone
͟
is selected, user can determines how the scanner treats the Talk Group that set with
emergency flag.
Off
The scanner ignores the emergency flag.
Alert1-9
The scanner sounds the Emergency Alert Tone when any Talk Group goes active with the
emergency flag set.
When you select
͞
Off
͟
, the scanner returns to the previous menu.
When you select
͞
Alert1-9
͟
, the scanner goes to the Alert Level selection.
Auto
The alert is set to the same volume as normal audio.
Level1-15
The alert is fixed to the selected audio level.
Press [E / yes / gps] to accept the entry and return to the previous menu.
