Umano Medical ook "snow" all 200-0000, Руководство пользователя

Страница: 27 / 77

OPERATING INSTRUCTIONS
USER MANUAL — 200-9011-ENG R1
25
Patient restraint location
Locations are available for patient restraint
straps. Four are located under the mattress
surface, two at head end of bed (A) and two at
foot end of bed (B). The six mattress retainers
can also accomodate for the restraint straps.
Two are located on each side of the backrest
section (D), two on each side at foot end of
the bed (E) and two on each side of the seat
section (C). Refer to illustration on the right
for localization.
WARNING
• Severe patient injuries could result of
an improper usage of restraint straps.
Healthcare professionals shall ensure
proper restraint straps usage, location
and adjustment.
Bumpers
Bumpers are located at each corner of bed to preserve wall. Each bumper offers a 3/4" socket to support IV poles.
Head bumpers (optional)
Two optional bumpers can be installed at head end of the bed for additional protection of the walls.
Bumpers with side view lights
Bumpers with integrated side view light system are located at both foot end corners of the bed. Foot end bumpers
offer a 3/4" socket to support IV poles. The green lights intensity can be controlled if the bed is equipped with
display screen; refer to the footboard control section (page 35). The side view light system will give the status
of the bed exit system:
• lights off: bed exit is not in use
• solid green: bed exit is armed
•
flashing green: patient has been detected and bed will arm when patient is properly positioned in bed
• flashing amber: bed exit has been triggered or motion interrupt has been triggered (if applicable)
• solid amber: bed exit is in pause mode (if applicable)
IMPORTANT
An audible signal can also be set; see bed exit control system settings in the Footboard control section (page 35).
B
A
C
E
D
!