Umano Medical ook "snow" all 200-0000 Скачать руководство пользователя страница 28

Страница: 28 / 77

OPERATING INSTRUCTIONS

USER MANUAL — 200-9011-ENG R1

Power cord support brackets

Support brackets are available at the head end of bed (illustrated) to store the power

cord during transportation or when not in use.

CPR release

CPR release handles are located on each side of the bed frame, under the backrest section. Usage shall be

limited to emergency situations only. An over usage could lead to mechanical degradation.

Operation:

To activate, pull and hold the CPR release handle to flatten all sections of patient sleep surface.

Release handle once surface has reached flat position. If released before surface is completely flatten, all

sections will stop retracting.

WARNING

• CPR release option usage shall be restricted to emergencies. To avoid injuries or product damages, ensure

total clearance around product prior to usage.

ATTENTION

• Usage shall be limited to emergency situations only. An over usage could lead to mechanical degradation.
•

If bed operates on battery, the thigh section will not reach flat postion.

IMPORTANT

Thigh section will not reach flat position if master lockout of thigh section or, a movement function of any control

is activated during motion.

Nurse call connector

If the bed is equipped with the optional nurse call system, the connector selected when ordered will be located at

the head end of the bed, on the frame. The connector is only designed for nurse call function and for room lights

control. Communication will be sent through system for a Nurse call initiated by the patient and/or for a bed exit

control alarm. Ensure the plug is properly inserted into connector.

Содержание ook "snow" all 200-0000














































































Результаты поиска

Содержание ook "snow" all 200-0000

Отзывы:

Похожие инструкции для ook "snow" all 200-0000

Бренды по названию

Популярные бренды

Umano Medical ook "snow" all 200-0000, Руководство пользователя

Результаты поиска

Содержание ook "snow" all 200-0000

Отзывы:

Похожие инструкции для ook "snow" all 200-0000

Бренды по названию

Популярные бренды