Umano Medical ook "snow" all 200-0000 Скачать руководство пользователя страница 23

Страница: 23 / 77

USER MANUAL — 200-9011-ENG R1

OPERATING INSTRUCTIONS

IMPORTANT

Read and understand all information covered in this manual before operating the equipment. Users shall be

knowledgeable about inherent hazards related to use of electric beds.

Power up and modes of operation

The bed is intended to operate while being connected to AC power through a hospital grade wall outlet. The bed

offers a battery powered mode as a convenience system to allow bed adjustments while in transit between rooms.

ATTENTION

• On battery powered mode, speed of movement and battery depletion rate highly depend on the weight

charge applied on the bed sleep surface. It is recommended to leave the bed connected at all time when in

use. If not followed, the battery may deplete after a few cycles when a significant charge is applied on bed

surface; this may lead to internal battery damage when fully depleted.

If the bed operates on batteries, the patient and caregiver controls for bed-motion will remain functional. A lockout

on siderail motion control will be saved.

Powered mode:

Powered mode is activated if the bed is power supplied or if power returns after

failure. All bed functionalities will operate if bed is power supplied. If battery level

requires recharge, the battery pictogram with integrated LED will be flashing green.

Screen sleep mode: Activated after 1 minute of bed inactivity; screen brightness will

decrease by half. After 2 minutes of bed inactivity, screen will turn off completely and

get in sleep mode. If a screen saver is activated, the information will be displayed

while in sleep mode. To get out of sleep mode, press on screen or on screen buttons

to access the home screen.

Содержание ook "snow" all 200-0000














































































Результаты поиска

Содержание ook "snow" all 200-0000

Отзывы:

Похожие инструкции для ook "snow" all 200-0000

Бренды по названию

Популярные бренды

Umano Medical ook "snow" all 200-0000, Руководство пользователя

Результаты поиска

Содержание ook "snow" all 200-0000

Отзывы:

Похожие инструкции для ook "snow" all 200-0000

Бренды по названию

Популярные бренды