Umano Medical ook "snow" all 200-0000 Скачать руководство пользователя страница 71

Страница: 71 / 77

USER MANUAL — 200-9011-ENG R1

PREVENTIVE MAINTENANCE

A preventive maintenance is required annually for this equipment. This maintenance program is based on a

normal use. Preventive maintenance frequency shall be increased if required. A minimum of one (1) annual

verification of all items of the

Preventive maintenance annual checklist

(page 70) is recommended.

WARNING

• Only trained and authorized personnel shall perform preventive maintenance and servicing on this

equipment. If not avoided, situation could result in personal injury or permanent equipment damage.

•

Only trained and qualified personnel shall perform preventive maintenance and servicing on this equipment.

If not avoided, situation could result in electrical or electronic misconnection and lead to shock or fire

hazards.

IMPORTANT

Batteries have an intended lifetime of 5 years and should be replaced after 5 years or sooner, depending on

battery backup usage.

If device is left unplugged for a long period, batteries will slowly drain. Do not fully drain batteries.

Batteries should be charged every 3 months. Plug the bed to a supply main with protective ground or to a hospital

grade outlet that is protectively grounded for a minimum of 6 hours.

Ensure that battery is properly charged prior to perform the preventive maintenance verification. If applicable,

secure any bed section that would have to be lifted during servicing procedures.

Содержание ook "snow" all 200-0000














































































Результаты поиска

Содержание ook "snow" all 200-0000

Отзывы:

Похожие инструкции для ook "snow" all 200-0000

Бренды по названию

Популярные бренды

Umano Medical ook "snow" all 200-0000, Руководство пользователя

Результаты поиска

Содержание ook "snow" all 200-0000

Отзывы:

Похожие инструкции для ook "snow" all 200-0000

Бренды по названию

Популярные бренды