Umano Medical ook "snow" all 200-0000 Скачать руководство пользователя страница 22

Страница: 22 / 77

GETTING STARTED

USER MANUAL — 200-9011-ENG R1

17. If applicable, test the room lights functions for proper operation.

18. If applicable, verify following options for proper operation: lateral bed extension, auxiliary power outlets and

USB port, nightlights, etc.

19.

Install mattress with proper specifications.

20. If bed is equipped with bed exit detection, perform a zero procedure on the bed after all equipment has been

installed.

Zeroing procedures

ATTENTION

• Patient must be out of bed.

Zeroing procedure for a bed with scale

Cancellation of zeroing process can be done at any time by pressing the “Cancel” button.

Procedure:

Bed is electrically powered up. Ensure sleep surface is completely flat and put the bed elevation system at

intended height of use. Apply the brakes.

2. From the display screen on the footboard, enter the Scale menu.

3. Press the “zero” button.

4. Password may be required, enter password.

5. Follow the instructions; patient out of bed, install all required equipments, accessories and mattress.

6. Press ZERO button on display screen again.

Do not touch bed while this is in progress

Zero is successful if a confirmation message appears and the display screen returns to “Scale” menu.

8. If failure occurs, a message appears to indicate that weight is unstable. Display screen will stay in Zero menu.

9. Ensure there is no interference and start over the procedure.

Содержание ook "snow" all 200-0000














































































Результаты поиска

Содержание ook "snow" all 200-0000

Отзывы:

Похожие инструкции для ook "snow" all 200-0000

Бренды по названию

Популярные бренды

Umano Medical ook "snow" all 200-0000, Руководство пользователя

Результаты поиска

Содержание ook "snow" all 200-0000

Отзывы:

Похожие инструкции для ook "snow" all 200-0000

Бренды по названию

Популярные бренды