Ulvac DC-10, Руководство по эксплуатации, Страница: 81 / 88

DC Power
【
DC-10/DC-20
】
8. Appendix
70
Command Transmission data Acknowledgment data
Command Command name Capacity Data content Capacity Data content
0x87
FAIL
UNIT
NUMBERS?
2byte
If an ERROR is occurred with an power supply unit
connected in M/S manner, the unit generating the
ERROR is replied with this command. The bit
corresponding to the unit stands up. If an ERROR is
occurred in multiple units, all the corresponding bits
stand up.
NO Fail
：
0x0000
MASTER
：
0x0001
SLAVE1
：
0x0002
SLAVE2
：
0x0004
SLAVE3
：
0x0008
SLAVE4
：
0x0010
SLAVE5
：
0x0020
SLAVE6
：
0x0040
SLAVE7
：
0x0080
SLAVE8
：
0x0100
SLAVE9
：
0x0200
SLAVE10
：
0x0400
SLAVE11
：
0x0800
example)
If ERROR occurs in MASTER, SLAVE4 and
SLAVE5, 0x0031 is returned.
0x88
UNIT
FAIL?
1byte
0x00-> Master
0x01-> Slave1
：
0x0B-> Slave11
4byte
Responds the content of the ERROR that has
occurred.
Specify the product to inquire about the contents of
FAIL with 0x88
The bit corresponding to ERROR is set.
If multiple ERRORs occur, all applicable bits are
set.
For details on the ERROR code and the contents of
the ERROR, refer to Table 4-12 in [4-11. Displaying
the ERROR code and WARNING code on the front
panel].
E10x 0x00000001 MODULE ERROR
E21x 0x00000004 CAN TIMEOUT ERROR
E30x 0x00000010 FUSE ERROR
E31x 0x00000020 OVER CURRENT ERROR
E32x 0x00000040 BUS OC ERROR
E33x 0x00000080 LARC ERROR
E34x 0x00000100 TEMP ERROR
E35x 0x00000200 FAN ERROR
E36x 0x00000400 SYSTEM POWER ERROR
E37x 0x00000800 CPU ERROR
E38x 0x00001000 CPU ERROR
E3Ax 0x00004000 EMG STOP RUN ERROR
E3Bx 0x00008000 POWER DEPRESSION
E43x 0x00800000 CONNECT ERROR
E3Cx 0x00010000 CPU ERROR
E3Dx 0x00020000 CPU ERROR
E3Ex 0x00040000 MODE MISMATCH
E60x 0x00080000 LEVEL OVER ERROR
E70x 0x00100000 PCB SETTING ERROR