Ulvac DC-10 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 88

Ulvac DC-10 Скачать руководство пользователя страница 12

DC Power

【

DC-10/DC-20

】

1. For your safety use

1

1. For your safety use

In order to use this unit in a safe manner, we describe the caution points on

safety, the attached position of warning labels and the contact party.

1-1. Caution on handling

This section describes precautions for use of this product. Thoroughly understand the following before
using this product.

The voltage generated by this power supply is enough to pose a risk to a human life. Therefore it shall
be handled with the greatest care. In the event that a person contacts this voltage, it leads to a
serious accident. Take great care not to contact a high voltage.

In addition,

never energize with the cover removed since it is dangerous.

This power supply involves a high voltage. Our or our group's personnel in charge support the
internal inspection and repair.

Before replacement etc. of the power supply, be sure to turn the upstream breaker to OFF and
remove the cable wires etc.

DANGER

DANGER

DANGER

«
...
10
11
12
13
14
...
»

Содержание DC-10

























































































Отзывы:

Нет отзывов