P/N CWSI-IM-C3K6 Rev. F
© 2017 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision
date and are subject to change without notice.
66
6.2.9 Accessing the System Info Screen
To access the system info screen, press the Sys Info soft key while the CP-3600(+) system normal
screen is showing. Enter the password if prompted to do so. The System Diagnostics menu will now
be shown. Highlight System Info and press enter. The screen below will be shown.
System Info Screen
The information on the System Info screen is mainly used for technical assistance. If you call CWSI for
technical assistance you may be asked for this information. The information is described below.
1. MAC Address – This is the MAC address of the Ethernet port. The Ethernet port is for factory
use only.
2. IP Address – The IP address would appear here if the Ethernet jack was connected to a host.
This will be 0.0.0.0 when not connected.
3. Serial Number – This is the serial number of the CP-3600(+) control panel.
4. System Version – This is the software version in the CP-3600(+) control panel.
5. Base Code – This is the current base code of the CP-3600(+) as described in this manual.
The info screen provides an easy way to view it.
6. No. of Repeaters – The number of currently enrolled repeaters is shown here.
7. No. of Devices – The number of currently enrolled devices is shown here.
8. No. of annun. – The number of currently enrolled annunciators.
9. Build Date – Refers to the build date of the software in the CP-3600(+) control panel. This
may be used if you call technical service.
Press the BACK key to exit the System Info screen. If an alarm is received while viewing the System
Info screen, the CP-3600(+) will exit viewing and display the alarm.
6.2.10 Accessing the Programming info Screen
To access the programming info screen, press the Sys Info soft key while the CP-3600(+) system
normal screen is showing. Enter the password is prompted to do so. The System Diagnostics menu will
now be shown. Highlight programming Info and press ENTER. The Programming Info screen will now
be displayed.
The information on the Programming info screen provides a summary of the all of the programming
options selected for the CP-3600(+) as well as all of the enrolled repeaters and devices. The summary
can be quite long depending on how many devices, annunciators and repeaters are enrolled. The
1 2 : 3 3 : 2 0 P M 0 8 / 1 4 / 0 9
S y s t e m i n f o
M A C A d d r e s s : 0 1 : 1 3 : E B : 9 9 : 7 8 : 9 8
I P A d d r e s s : 0 . 0 . 0 . 0
S e r i a l N u m b e r : 0 4 2 9 b 3
S y s t e m V e r s i o n : 3 . 0
B a s e C o d e : 0 4 6
N o . o f R e p e a t e r s : 2 0
N o . o f D e v i c e s : 3 7 5
N o . o f A n n u n . : 2
B u i l d D a t e : J u l y 1 2 0 1 1