P/N CWSI-IM-C3K6 Rev. F
© 2017 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision
date and are subject to change without notice.
26
4.3 Initial System Configuration
After the CP-3600(+) is powered up and the automatic System Initialization procedure is complete the
System Requires Configuration screen will be shown.
Press the setup soft key and you will be prompted to enter a password. The default password is 3000.
After entering the password press the ENTER key and the screen below will be shown.
The three menu items shown are important to verify and change if necessary before continuing to the
system main screen and performing any other programming.
We strongly recommend setting the
time and date as a minimum so the event logs will have the correct time and date from this point
forward.
If you choose not to change or set any of these items then you can press the DONE soft key
to proceed to the main CP-3600(+) screen. All of these items can be changed later through the Config
menu accessible from the main screen.
S y s t e m R e q u i r e s C o n f i g u r a t i o n
S e t u p
C P - 3 6 0 0 ( + )
I n i t i a l C o n f i g u r a t i o n M e n u
D o n e
S e t T i m e a n d D a t e
P a s s w o r d S e t u p
B a s e c o d e S e t u p
S u p e r v i s o r y S e t u p