24 Port SNMP Managed Switch – User Manual
Page
9
Product Number 0-1591058-x
© Tyco Electronics 2003
PL0351 Issue 1
Rack-mounted Installation
The 24 Port SNMP Managed Switch is supplied with a rack-mounted kit and can be mounted
in an EIA standard size, 19-inch rack. The Switch can be placed in a wiring closet with other
equipment.
Perform the following steps to rack mount the Switch:
Position one bracket to align with the holes on one side of the Switch and secure it with the
smaller bracket screws. Then attach the remaining bracket to the other side of the Switch.
Figure 3-2. Attach mounting brackets with screws
After attaching both mounting brackets, position the switch in the rack by lining up the holes in
the brackets with the appropriate holes on the rack. Secure the switch to the rack with the
rack-mounting screws.
Figure 3-3. Mount the 24TP+1Fiber Module Switch in an EIA standard 19-
inch Rack
Note: For proper ventilation, allow about at least 4 inches (10 cm) of clearance on the front
and 3.4 inches (8 cm) on the back of the Switch. This is especially important for enclosed rack
installation.
