24 Port SNMP Managed Switch – User Manual
Page
45
Product Number 0-1591058-x
© Tyco Electronics 2003
PL0351 Issue 1
Permanent Address Configuration
Figure 51. The Static Unicast Address in Permanent Address Configuration
Menu
This Permanent Address menu has 2 sub-menus:-
•
Static
Unicast
Address
•
Static
Multicast
Address
You can Add, modify, or delete Static Unicast Address by selecting entries from the following
screen.
Enter the MAC address of a connected device you wish to set as static unicast address for
the associated switch port. Select the status field between Disable, Forwarding, Filter-In, and
Filter-Out.
•
Disable – This Unicast Address entry has no effect to the switch system.
•
Forwarding – All packets designated to this MAC address will be forwarded to (and
only to) the designated port.
•
Filter-in – Only packets originated from this MAC address will be permitted to enter
this port, in other words, packets originated from other MAC address will be dropped
at this port automatically.
•
Filter-out – All packets designated to this MAC address will be blocked (the port is
disregard here).
Due to menu restrictions, the following points apply:-
•
The MAC address needs to be manually entered and cannot be acquired by learning
the MAC address from a port or switch table.
•
Only one static table entry at a time can be entered. It is necessary to go back to the
table view to select the next entry for editing.
