24 Port SNMP Managed Switch – User Manual
Page
5
Product Number 0-1591058-x
© Tyco Electronics 2003
PL0351 Issue 1
Hardware Description
The 24 Port SNMP Managed Switch has fixed 24-port auto-sensing Ethernet RJ-45
connectors, and a chassis containing two expansion slots. The optional modules enable the
switch to be used in new and legacy networks.
The Front Panel
The front panel of the switch consists of 24 x auto-sensing 10/100Mbps Ethernet RJ-45 Ports,
two optional expansion slots, and console port. The LED Indicators are also located on the
front panel of the Switch.
Figure 2. The Front Panel of 24 Port SNMP Managed Switch
10/100Base-TX Auto MDI/MDIX RJ-45 Ports
The switch has 24 x 10/100Mbps auto-sensing ports for 10Base-T or 100Base-TX device
connection. The auto-MDI/MDIX function enables the direct connection another switch or
workstation without needing to select either a straight or cross-over cable.
Expansion Slots
The switch can support up to two of the following optional single port modules, which can be
used in any combination:
•
10/100/1000Mbps Auto-MDI/MDI-X RJ-45 module
•
1000Base-SX multimode fiber module
•
1000Base-LX singlemode fiber module
•
100Base-FX SC multimode fiber module
•
100Base-FX MT-RJ multimode fiber module
•
100Base-FX SC singlemode fiber module
LED Indicators
RJ-45 Ports
Console Port
Expansion Slots for Option Modules
