24 Port SNMP Managed Switch – User Manual
Page
26
Product Number 0-1591058-x
© Tyco Electronics 2003
PL0351 Issue 1
Select the VLAN entry to create, modify, or delete the VLAN group. Use <Space Bar> to
check (join) port(s) to the VLAN group.
Static VLAN Configuration
This mode is used to manually specify the ports that a VLAN has in its member set. This is
achieved by manually editing the filtering database as shown below. This mode is useful on
ports where the configuration is fixed or where the network manager wants to establish an
administrative boundary outside of which any GVRP dynamic VLAN registration information is
ignored.
Ensure that the IEEE802.1Q VLAN mode was selected in the Switch Device Configuration
menu. If the IEEE802.1Q static VLAN mode was not selected, then the status line in the Static
VLAN Configuration menu will show
Static VLAN : Disabled
The first screen shows the currently selected VLAN sorted by an internal index number.
Select the VLAN entry to create, modify, or delete and proceed to the next screen.
Figure 23. The Static IEEE802.1Q VLAN Configuration menu
Figure 24. Modifying The Static IEEE802.1Q VLAN Configuration menu
