24 Port SNMP Managed Switch – User Manual
Page
10
Product Number 0-1591058-x
© Tyco Electronics 2003
PL0351 Issue 1
Connecting to the Switch
The Console port is a male DB-9 connector located on the front panel of the switch that
enables a connection to a PC or terminal for monitoring and configuration. Use the supplied
RS-232 cable with a female DB-9 connector to connect a terminal or PC to the Console port.
The Console configuration allows you to program the Switch to enable a user at a remote
location to communicate with the unit as if the console terminal were directly connected.
Figure 3-4. Connecting the 24 Port SNMP Managed Switch to a terminal via
RS-232 cable
