24 Port SNMP Managed Switch – User Manual
Page
52
Product Number 0-1591058-x
© Tyco Electronics 2003
PL0351 Issue 1
Port Based VLAN Configuration
This menu is accessed VLAN Configuration menu and is used to set the port based VLAN
mapping for the switch. In this case, the VLANs purely provide an access link that does not
support tagged VLAN traffic.
Select Port Based VLANs from the pull-down list in the Switch Configuration > VLAN Mode
Configuration box. Click the Submit button at the bottom of the Switch Configuration page to
save the setting. Select VLAN Configuration and then Port Based VLAN Configuration to view
the page below:-
Figure 60. The Port Based VLAN Configuration Menu
Add a VLAN by clicking the Add button at the bottom of the page, enter the VLAN name (for
local reference only), then select the registration state of the port (Yes to register the port and
No to de-register the port as a member of the VLAN). If the VLAN is to be placed into service,
then select Enable from the Status box. Click the Submit button at the bottom of the page to
save the settings.
To modify or delete a VLAN, use the mouse to click on the map display of the required VLAN.
This highlights the line in both panes of the display.
Notes:-
1. There is no acknowledgment after the Delete button is pressed, so the action is
irreversible.
2. The switch allows the creation of different Port Based VLANs sharing the same
physical ports. This is not a valid combination as only 1 VLAN should be assigned to
a physical port.
