3-9
l
Remove the hexagonal flange bolts (M6x16 -
2 nos.) from the adjuster assembly mounting
and take out the adjuster assembly along with
a gasket. (Fig. 3.26)
8 mm spanner
Tightening torque
10 ± 2 Nm
l
Remove the hose air cut valve of secondary air
injection assembly by dislocating the hose clip.
(Fig. 3.27)
Nose plier
l
Remove the hexagonal bolt (M6x16 - 1 no.)
along with wave spring washer from the
mounting of pipe complete SAI (at cylinder
block). (Fig. 3.28A)
l
Remove the hexagonal bolt (M6x16 - 1no.)
from the mounting of pipe complete SAI (at
magneto cover) and dislocate the pipe
complete SAI. (Fig. 3.28B)
8 mm spanner
Tightening torque
5.5 ± 0.5 Nm
l
Disconnect the wiring socket (A) of ignition coil
from the wiring harness. (Fig . 3.29)
l
Remove the hexagonal flange bolt (M6x20 -
2 nos.) from the mounting of ignition coil
assembly and take out the ignition coil.
(Fig. 3.29)
10 mm spanner
Tightening torque
5.5 ± 1 Nm
Fig. 3.26
Fig. 3.27
Fig. 3.28A
Fig. 3.28B
Fig. 3.29
TVS APACHE RTR 200
SERVICE MANUAL
SERVICING OF ENGINE
A
A
A
