CLUTCH PLATES (Plate clutch drive & driven)
Inspect the plate clutch drive and driven at
every 21000 km. Replace if required.
l
Normally clutch is serviced for:
- Lose of power / low pick-up
- Jerking of vehicle
- Any abnormal noise from clutch
l
But as a precaution measure the clutch drive
and driven plates must be inspected and if
required replaced at every 21000 km for the
better performance of the vehicle. (Fig. 2.62)
l
Refer chapter “Servicing of engine” page no.
3- for clutch removal and servicing procedure.
2
ENGINE BREATHER HOSE
Inspect at every service. Replace every
21000 km if required.
l
Visually inspect the engine breather hose for
any crack, leakage, damage or deformation. If
found any, replace the engine breather hose.
(Fig. 2.63)
CARBURETTOR RUBBER DUCTS (Pipe intake
complete and Tube outlet)
Inspect at every 3000 km. Replace every
21000 km if required.
l
Visually inspect the pipe intake complete and
air cleaner tube outlet for any crack, leakage,
damage or deformation. (Fig. 2.64)
l
If found any, replace the pipe intake complete
and air cleaner tube outlet.
Note:
Since the air cleaner tube outlet is pasted
with the case complete air cleaner, the air
cleaner outlet tube must be changed along
with the case.
TVS APACHE RTR 200
SERVICE MANUAL
PERIODIC MAINTENANCE
2-24
Fig. 2.62
Fig. 2.63
Fig. 2.64
