Fig. 3.181
Fig. 3.182
Fig. 3.182
l
Assemble the retainer spring on the balancer
shaft and secure it with the wood ruff key.
(Fig. 3.181)
l
Assemble the gear balancer shaft driven
assembly on the balancer shaft. (Fig. 3.182)
Caution:
While reassembling, align balancer drive
and driven gears to match dot/punch
marks (A) in one line as shown in the
figure.
l
Assemble the retainer spring (A) and the shim
(B) on the balancer shaft. (Fig. 3.183)
l
Place a thrust washer on the crankcase
assembly LH at shaft complete drive seating
area (above the ball bearing). (Fig. 3.183A)
l
Place the gear 2nd driven on the crankcase
assembly LH at shaft complete drive seating
area (above the thrust washer). (Fig. 3.183B)
A
A
A
A
A
Fig. 3.183A
Fig. 3.183B
TVS APACHE RTR 200
SERVICE MANUAL
SERVICING OF ENGINE
3-54
