Fig. 4.9
Fig. 4.10
Fig. 4.11A
Fig. 4.11A
Fig. 4.12A
Fig. 4.12B
l
Fully loosen the throttle cable lock nut (A) while
holding the adjuster (B). (Fig. 4.9)
10 mm spanner
l
Dislocate the hose clip and pull out the air vent
hose from the cylinder head assembly.
(Fig. 4.10)
Nose plier
l
Loosen the clamp outlet pipe and dislocate the
tube outlet pipe of air cleaner from the
carburettor assembly. (Fig. 4.11A)
Phillips head screw driver
Tightening torque
1.75 ± 0.25 Nm
l
Similarly, loosen the clamp intake pipe and
gently pull out the carburettor assembly from
the intake pipe. (Fig. 4.11B)
Tightening torque
2.25 ± 0.25 Nm
l
Remove the CRR. pan head screw from the
choke lever mounting and take out the lever
along with a collar by gently dislocating it from
the valve starter (chock plunger). (Fig. 4.12A)
Phillips head screw driver
l
Loosen the cable holder (A) from the
carburettor body and take out the valve starter
as an assembly (choke plunger assembly).
(Fig. 4.12B)
13 mm spanner
TVS APACHE RTR 200
SERVICE MANUAL
FUEL, LUBRICATION AND
EXHAUST SYSTEM
4-5
B
A
A
