Fig. 2.9
Fig. 2.10
Fig. 2.11A
Fig. 2.11B
Fig. 2.12
COVER FUEL TANK ASSEMBLY
REMOVAL
l
Remove the fuel tank as explained earlier.
l
Remove the CRR flanged pan head tap screw
(A) (ST4.2x13 - 2 nos.) from the mounting of
deflector. (Fig. 2.9)
Phillips head screw driver
Tightening torque
1.5 ± 0.5 Nm
l
Similarly, remove the CRR pan head screw (B)
(M6x12 - 1 no.) from the mounting of deflector
with cover fuel tank. (Fig. 2.9)
Tightening torque
10 ± 2 Nm
l
Take out the deflector by carefully dislocating it
from the lugs.
l
Remove the CRR pan head screw (M6x12 -
1 no.) from the mounting of cover fuel tank
inner L with the fuel tank. (Fig. 2.10)
Phillips head screw driver
Tightening torque
10 ± 2 Nm
l
Remove the CRR pan head screw (M6x12 -
2 nos.) from the cover fuel tank front mounting.
(Fig. 2.11A)
l
Similarly, remove the CRR pan head screw
(M6x12 - 1 no.) from the cover fuel tank rear
mounting. (Fig. 2.11B)
Phillips head screw driver
Tightening torque
10 ± 2 Nm
l
Remove the CRR pan head screw (M6x12 -
2 nos.) from the cover fuel tank rear mounting.
(Fig. 2.12)
Phillips head screw driver
Tightening torque
10 ± 2 Nm
Note:
Ensure the presence of retainer clips
before installing the screws during
re-assembly.
TVS APACHE RTR 200
SERVICE MANUAL
PERIODIC MAINTENANCE
B
A
2-6
