TVS APACHE RTR 200
SERVICE MANUAL
CHASSIS
6-40
l
Remove the bracket complete rear caliper by
sliding out after dislocating boot-B and bush
boot pin from the pin grooves. (Fig. 6.117)
l
Carefully pull out the cap piston (A) and boots
(B)from the caliper assembly housing.
(Fig. 6.118)
l
Insert a spacer between piston caliper and the
caliper housing (at pad position) and then apply
compressed air through the inlet port of the
caliper to slide pistons out. (Fig. 6.119)
Caution:
Be careful while applying compressed air
as it will shoot the piston forcefully. Do not
use high pressure air to prevent damage to
the piston.
Do not use nose plier to pull out the piston
as it may cause scratches.
l
Remove the dust seals with a bent plastic /
brass tool to avoid scratches on the caliper
bore. (Fig. 6.120)
Fig. 6.117
Fig. 6.118
B
B
A
Fig. 6.119
Fig. 6.120
