IG. 49
Mount the
Back Pad (#27)
to the
Back Pad Bracket (#6)
and
ecure into place using two Hex Head Cap Screws 3/8-16 X 1 (#32) and
wo Bumper Washers 3/8 (#81). Cap-off the two Bumper Washers 3/8
#81-Not shown) using two Bumper Caps Black (#80-Not shown).
Note
: Refer to
Fig. 54
on page 19 for further clarification of this assembly.
FIG. 50
Locate the Coil Chain (#68) and two Snap Links (#69) an
attach them to the Low Row Bar (#15) and to the
Leg Extension Cabl
(#12)
as shown above.
FIG. 48
Next, using a rubber mallet, insert one Foot Roll Plastic End
Cap 1” (#52) to each end of the three tubes, as shown above. Refer to
the Exploded View Diagram on page 17 for further clarification of this as
sembly.
IG. 47
Attach one Foam Foot Roll 7 X 4 X 1 (#29) to each end of the
hree tubes, as shown above. Refer to the Exploded View Diagram on
age 17 for further clarification of this assembly.
CFM-500 Compact Frontal Machine
14
Owner’s Manual: Assembly Instructions
