A
bout the Compact Frontal Machine (CFM -500)
Congratulations on your new purchase of the Compact Frontal
Machine (CFM-500). This gym is capable of a variety of different
exercises, as-well-as, smooth and user-friendly adjustment
eatures.
In addition, this gym has been designed to meet the
eeds and performance requirements for a suitable home exercise
machine. We hope you are completely satisfied with this product
and wish you many years of enjoyment.
T
uff Stuff Equipment
This Tuffstuff product has been built to precise quality standards
and has been carefully packaged to ensure that damage will not
occur during shipment. The Home Lifetime Warranty and signature
ndicating final inspection has been conducted by our line foreman,
s an expression of our confidence in the completeness, the
materials, and workmanship of this product.
W
arranty
SEE A COPY OF WARRANTY ON BACK PAGE.
R
egistration Card
To avoid unnecessary delays in warranty service and to insure that
a permanent record of your purchase is on file with our factory, be
ure to complete the warranty registration card and send it to Task
ndustries today.
A
Note
provides information necessary to properly
complete a procedure or information which will make
the procedure easier to understand.
A
Caution
provides a special procedure or specia
steps which must be taken while completing the
procedure where the
Caution
is found. Not following
a
Caution
can result in damage to the equipment.
A
Warning
provides a special procedure or special
steps which must be taken while completing the
procedure where the
Warning
is found. Not following
a
Warning
can result in personal injury.
A
ssembly Notes
1. Read and follow each step of this Assembly Instruction Manual in
sequence. Do not skip ahead, as it will result in an improper
assembly or in having to disassemble parts later.
2. During the assembly of this unit you will be instructed to leave
some Hex Head Cap Screws loosely fastened. Naturally, they
will be fully fastened later in the assembly process. This is done
to prevent any difficulty with alignment of some parts during this
assembly.
Loosely Fasten
provides a instruction to loosely
fasten (
ex:
hand tighten
) a hardware assembly only.
This instruction is intended for the alignment of
hardware components during the assembly process.
Fully Fasten
provides a instruction to fully fasten
(
ex:
completely tighten
) a hardware assembly.
Hardware Measurement Diagram
CFM-500 Compact Frontal Machin
1
A
bout the Icons
The icons displayed in this Owner’s Manual are used to facilitate
the correct assembly and safe use of this Product, as-well-as to
prevent injury to yourself or anyone else.
LOOSELY FASTEN
F U L L Y F A S T E N
Introduction
Note:
Due to continuing product improvements, specifications and designs are subject to change
without notice.
Even though we have prepared this manual with extreme care, neither the publisher nor the autho
can accept responsibility for any errors in, or omission from, the information given.
S
pecifications
. Maximum Wt. Capacity
- 200 Lbs. Fixed
. Total Machine Weight
- 430 Lbs.
. Footprint (LWH)
- See Front Cover
P
rior to the Assembly of the CFM -500
. We advise you to consult your local Tuff Stuff retailer if you
should have a question or problem regarding the proper
assembly of this Compact Frontal Machine (CFM-500).
2. Consider the complete surface area of the CFM-500. Use the
overhead view on the front page for designing your layout before
assembling. Once the CFM-500 has been fully assembled it will
be heavy and difficult to move, therefore you should assemble
the CFM-500 in the area where it is to be used upon completion.
3. It is recommended that another person assist you with the
assembly this unit.
4. Neatly organize and identify all parts according to the Parts List
on page 1 8 and the Exploded View Diagram on page 17.
T
ool Requirements
1. One 9/16” combination wrench
2. One 3/4” combination wrench
3. One 7/8” combination wrench
4. One 1/2” combination wrench
5. Two 7/16” combination wrenches
6. One ratchet
7. One 9/16” socket
8. One 3/4” socket
9. One rubber mallet
0. Windex or household glass cleaner
1. One can silicone spray/ teflon spray lubricant
2. Multi-purpose grease
3. Measuring tape
4. Masking tape
5. Utility knife
