Tseng Qtec VGA 1024, Руководство по установке

Страница: 24 / 123

Qtec VGA1024 as Primary Display Adapter
TABLE B
EGA CONFIGURATION
Use this table if you want EGA mode as an automatic default mode
when you power-on your system. In this configuration, Qtec
VGA1024 is a primary video adapter attached to a digital (T T L )
display via 9-pin video connector (DB9). The initial display will
come up on the screen attached to the Qtec VGA1024 board.
Switch Settings Type of Display attached and
Initial Mode Selection
SW1
SW2 SW3 SW4
Primary Display
(Attached to Qtec
VGA1024 board)
Secondary Display
(Attached to
Monochrome Adpater
on on on off Enhanced color
monitor (IBM 5154
or compatible
Monochrome
(IBM 5151)
or None
off on on off Enhanced color or
multisyncing displays
(IBM 5154/compatible,
or multisyncing
monitors *)
Monochrome
(IBM 5151)
or None
Multisyncing, Variable-frequency monitors include the NEC
Multisync, Sony Multiscan, Mitsubishi Diamond Scan, IDEK
Multiflat and other compatible devices.
IMPORTANT NOTE
If you would like to have an analog monitor connecting to
DB15 and EGA/MultiSync monitor connecting to the DB9 at the
same time and want register-level EGA compatibility on EGA
monitor, please connect the EGA monitor to DB9 first, set
switch to EGA configuration, re-set your computer, then
connect the analog monitor to DB15. Qtec VGA1024 is
initialized (when computer is power-on or re-set) to VGA mode
when an analog monitor is attached to the 15-pin connector
regardless of its switch setting.
-15-