Tseng Qtec VGA 1024, Руководство по установке

Страница: 65 / 123

Example: C:>COPY A :GEMSETUP.V22 B :GEMSETUP.TXT
Please note that you are copying the GEMSETUP.V22 file from
your Qtec VGA1024 Driver Diskette to your GEM Device Driver
Disk #1 diskette while simultaneously renaming it to
GEMSETUP.TXT.
After the GEM Device Driver Disk #1 is copied with the new
GEMSETUP.TXT file, you can proceed with the installation.
3. Install GEM as per instructions. When the program asks,
"Which graphics card and display do you have?", respond with
choice:
VGA Adapter (800 x 600) 16-color Mode;VGA 800 or
VGA Adapter (1024 x 768) 16-color Mode;VGA 1024
as your video adapter, whichever is appropriate for your
hardware configuration.
The GEM installation program will ask you to insert the Qtec
VGA1024 Driver Diskette into drive A and the installtion will
continue. Complete the GEM installation as instructed.
4. You can now begin using GEM 2.2.
Driver Installation for GEM 3.Q-3.J.
The following instructions are applicable to users of GEM Versions
3.0 and 3.1, and the Qtec VGA1024 Adapter.
Please be sure that your monitor is capable of displaying these
resolutions in order the utilize the drivers. Choosing a higher
resolution than your monitor is capable of displaying will bring
unsatisfactory results.
The enclosed GEM driver files require a new GEMSETUP.TXT file to
be installed in place of that which is on GEM System Master Disk.
The drivers make full use of the extended graphics modes of the
Qtec VGA1024 Adapter.
Before installing GEM, perform the following steps:
1. Make a DISKCOPY of GEM System Master Disk. This copy will be
used in place of the original during installation.
-51-