Tseng Qtec VGA 1024, Руководство по установке

Страница: 61 / 123

DRIVER INSTALLATION
FOR MICROSOFT WINDOWS VERSION 2
The instructions which follow are applicable to users of Microsoft
Windows version 2 and Qtec VGA1024 board. Please note that, to
use the 800x600 or 1024x768, an ANALOG variable-frequency or
functional equivalent monitor is required. Please be sure that
your monitor is capable of displaying these resolution in order to
utilize this driver. Choosing a higher resolution than your
monitor is capable of displaying will bring unsatisfactory
results.
The Qtec VGA1024 Utility Diskette contains new driver files under
WIND0WS2 sub-directory. These drivers will replace the driver
files contained on the Windows Screen Driver Diskette.
Instructions:
1. Run the Windows SETUP program as usual, when the choose the
display adapter menu is displayed, select "Other Display
Driver Supplied by Manufacturer" option.
2. When prompted by Windows program "Insert disk for your display
driver in the following drive", insert the Qtec VGA1024
Utility Diskette into drive "A:" and type A : \WINDQWS2 and
press RETURN
3. Windows will locate the supplied drivers and display:
VGA Adapter 800x600 16 colors
VGA Adapter 1024x768 16 colors
4. Select the option you wish to use.
5. When prompted by Windows, select "VGA Fonts".
6. Continue with the rest of the Windows setup process.
After you complete the above steps you can begin using Windows.
-47-