Tseng Qtec VGA 1024, Руководство по установке

Страница: 28 / 123

Qtec VGA1024 as Secondary Display Adapter
TABLE F
MONOCHROME CONFIGURATION
Use this table if the Qtec VGA1024 board and the IBM Monochrome
Display Adapter are BOTH installed in your system and the Qtec
VGA1024 board is a secondary video adapter. The Qtec VGA1024 may
drive either a digital (T T L ) monitor via 9-pin video connector
(DB9) or an analog monitor (IBM 85XX monitor or Variable-frequency
monitor) via 15-pin video connector (DB15).
Switch Settings Type of Display attached and
Initial Mode Selection
SW1
SW2 SW3 SW4
Primary Display
(Attached to
Monochrome Adapter)
Secondary Display
(Attached to
Qtec VGA1024)
on on on on Monochrome
(IBM 5151)
Color 40x25
(IBM 5153)
off on
on on Monochrome
(IBM 5151)
Color 80x25
(IBM 5153)
on off on
on Monochrome
(IBM 5151)
Enhanced color
(IBM 5154)
off off
!
on on Monochrome
(IBM 5151)
Enhanced color
(IBM 5154) or
Multisyncing,
Variable-frequency
TTL monitors *
on ! on
off off Monochrome
(IBM 5151)
Color 80x25
(IBM 85xx)
off on off off Monochrome
(IBM 5151)
Color 80x25
(Multisyncing,
Variable-frequency
analog monitors *)
Multisync, Variable-frequency monitors include the NEC
Multisync, Sony Multiscan, Mitsubishi Diamond Scan, Thomson
Autoscan, IDEK Multiflat and other compatible devices.
-19-