Tseng Qtec VGA 1024, Руководство по установке

Страница: 56 / 123

DRIVER INSTALLATION
FOR AUTODESK’S AUTOCAD 2.5
The instructions which follow are applicable to users of
Autodesk's Inc. AutoCAD Version 2.5 and Qtec VGA1024 board.
Please note that to use the 800x600 or 1024x768 mode of the Qtec
VGA1024, an ANALOG variable-frequency or functional equivalent
monitor is required. Choosing a higher resolution than your
monitor is capable of displaying will bring unsatisfactory
results.
The Qtec VGA1024 Utility Diskette contains the AutoCAD ADI driver
program named DSVGA.EXE which makes full use of the high
resolution graphics capabilities of the Qtec VGA1024 board.
Instructions:
1. Copy the driver program DSVGA.EXE contained on the Qtec
VGA1024 Utility Diskette to the disk which has the AutoCAD
program files.
2. The Qtec VGA1024 driver program DSVGA.EXE needs to be loaded
before you can use the 1024x768, 800x600 and 640x480 modes
with AutoCAD. Once loaded, the driver remains memory resident
until you power off or restart your system. Remember that you
need to load the driver only once each time you power on or
restart the system.
To load the driver program via one line of entry type
DSVGA -r-f 123456} -v{nn> -zJyn>
where -r selects the desired resolution listed below.
1 = 640x480 (8x8 Font, 16 color)
2 = 1024x768 (8x16 Font, 16 color)
3 = 640x480 (8x16 Font, 2 color)
4 = 800x600 (8x16 Font, 16 color)
5 = 640x480 (8x16 Font, 16 color)
where -v selects the interrupt vector for driver used
(7A is the default interrupt used by both AutoCAD and
this driver).
where -z selects whether the menu should be zoomed or not,
enter Y for yes or N for no.
-42-