Tseng Qtec VGA 1024, Руководство по установке

Страница: 54 / 123

8. The Advanced Options Menu will appear on your screen. Select
M odify Current Driver Set and press RETURN.
9. The current drivers selected will appear on your screen.
Select Text Display and press RETURN.
10. The text display drivers will appear on your screen. Select
the VGA Adapter driver you want to use and press RETURN. As
discussed earlier, the available drivers are:
VGA Adapter
VGA Adapter
VGA Adapter
VGA Adapter
VGA Adapter
VGA Adapter
(All Color Text Modes)
(80x25 Color Text Only)
(132x25 Color Text Only)
(132x28 Color Text Only)
(132x44 Color Text Only)
(80x60 Color Text Only)
11. The currently selected drivers will appear on your screen.
Verify that the driver you selected appears in the Text
Display field. Select Return to menu and press RETURN.
12. The Advanced Options Menu will appear on your screen. Select
Save Changes and press RETURN.
13. At this time the Install program prompts you for the name of
your driver set. Lotus 1-2-3 and Lotus Symphony permit
selection of the driver set to use when you start the
program. If you want to name the driver set, type the name
and then press RETURN. For example, if you selected the VGA
Display (132x28) driver you may wish to name it VGA28. To
save the current driver set using the default name of 123 for
Lotus 1-2-3 or LOTUS for Lotus Symphony simply press RETURN.
These default driver sets will be used automatically if you
don't explicitly select another driver set when you run Lotus
or Access.
14. The Install program will inform you that the driver set has
been saved. Press RETURN. The Exit Menu will appear on your
screen. You can create additional driver sets at any time by
selecting the
Advanced_Qp-tions_Menu,__
Modify Current Driver
Set. and Save Changes procedures of the Install program (step
8 through 13 above). If you want to create additional driver
sets now, press RETURN to go to the Main Menu. Don't forget
to use a different name for each driver you save. When you
are finished select Yes and press RETURN to exit the Install
program.
-40-