Tseng Qtec VGA 1024, Руководство по установке

Страница: 46 / 123

Conflicts with other RAM resident programs and Changing Hot key
Since the ZOOM programs are RAM resident utilities, and many users
now load other RAM resident routines in their systems, conflicts
may result when one program uses the same interrupt number as
another RAM resident program. If you suspect there exists a
conflict in your system you may wish to load the HOTKEY program at
a different interrupt location or perhaps change the hot key that
wakes HOTZOOM up. If you have previously loaded the ZOOM
programs, re-boot your computer and perform the following steps:
1. Insert the Qtec VGA1024 Utility Diskette into drive A.
2. Type: A:HOTKEY 1
A:HOTZOOM
3. Answer the questions concerning your hot key choice and the
new interrupt number used by HOTKEY. To select the defaults
simply hit the return after each question.
The HOTKEY program replaces the BIOS keyboard interrupt so
that it may intercept keys and determine when the user
specified hot key has been hit. HOTZOOM also installes itself
as a RAM resident program, therefore, the ZOOM programs use
two adjacent interrupt locations specified during the
initialization sequence. The default locations are 60H and
61H and the default hot key is F10 (function key 10).
Note that interrupt numbers 60H-67H are usually reserved for
user application programs, like ZOOM. Other interrupt numbers
may have operating system or hardware specific functions.
4. Make sure you load the HOTKEY and HOTZOOM programs before you
run an application program.
-35-