TruVision 7 IP VF TVD-5715, Руководство по настройке

Страница: 81 / 116

TruVision Series 7 IP Camera Configuration Manual 77
2. Select the Enable Intrusion Detection check box to enable the function.
3. Click Draw Area , and then draw a rectangle on the image as the defense region.
When you draw the rectangle, all lines should connect end-to-end to each other. Up
to four areas are supported. Click
Clear to clear the areas you have drawn. The
defense region parameters can be set up separately.
Note : The area can only be quadrilateral.
4. Choose the region to be configured.
Threshold: This is the time threshold that the object remains in the region. If you
set the value as 0 s, the alarm is triggered immediately after the object enters the
region. The range is between 0 and 10.
Sensitivity: The sensitivity value defines the size of the object that can trigger the
alarm. When the sensitivity is high, a small object can trigger an alarm. The range is
between 1 and 100.
5. Set the arming schedule for the alarm input. See “To set up motion detection” on
page 62 for more information.
6. Specify the actions when an event occurs. Select one or more response actions
when an intrusion detection alarm is triggered.