TruVision 7 IP VF TVD-5715, Руководство по настройке

Страница: 95 / 116

TruVision Series 7 IP Camera Configuration Manual 91
a) Select the Enable Timing Snapshot check box.
b) Select the desired format of the snapshot. Default is JPEG.
c) Select the desired resolution and quality of the snapshot.
d) Enter the time interval between two snapshots. Select the unit of time from the
drop-down list: milliseconds, seconds, minutes, hour, or day.
In the Event-Triggered section, select the parameters for event-triggered snapshots:
a) Select the Enable Event-Triggered Snapshot check box.
b) Select the desired format of the snapshot. Default is JPEG.
c) Select the desired resolution and quality of the snapshot.
d) Enter the time interval between two snapshots. Select the unit of time from the
drop-down list: milliseconds, seconds, minutes, hour, or day.
6. Under Capture Number , enter the total number of snapshots that can be taken.
7. Click Save to save changes.
HDD management
Use the storage management window to display the capacity, free space available, and
the working status of the HDD of the NAS and the SD card in the camera. You can also
format these storage devices.
Before formatting the storage device, stop all recording. Once formatting is completed,
reboot the camera as otherwise the device will not function properly.
If Overwrite is enabled, the oldest files are overwritten when the storage becomes full.
To ensure an efficient use of the storage space available on HDDs, you can control the
camera’s storage capacity using HDD quota management. This function lets you
allocate different storage capacities for main stream/substream recordings and
snapshots.
Note : If the overwrite function is enabled, the maximum capacity for both recordings
and snapshots is set to zero by default.
To format the storage devices:
1. Click Configuration > Storage > Storage Management > HDD Management .